PVC (polyvinyl chloride) pipe and fittings are ideal for use in pressurised irrigation systems, drinking water, chemical installations and for water treatment.

PVC Connector 75 or 90mm Glue - 2" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems.

Simply cut the pipe to length, clean the ends with methylene chloride, removing all debris, apply glue to both the pipe and fitting - then push together. All fittings and pipework have smooth bores which aid in good flow characteristics and resistance to abrasion.

If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. PVC Equal Tee 16 Bar Rated 75mm x 75mm x 75mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard’. Threaded PVC Reducing Bush 2X Glue 16 Bar 75mm x 63mm PVC-U is a Polyvinylchloride without plasticizers that is extremely suitable for very wide applications, such as: Chemical installations Portable water applications Food and beverage. Please Note: A tolerance of 5% in cut length measurement must be allowed due to manufacturing process.Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 50mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. In the unlikely event that the shipment contains damaged packages or packages are missing, these must be documented on the driver’s consignment note.

Please note that we try to give general advice, this may not be specific to your spa or hot tub so please always check with the equipment manufacturer first. Pressure pipe that provides excellent chemical resistance to most solutions of acids, alkalis and salts and solvents that can be mixed with water. VDL 45º Elbow 16 Bar Rated 75 mm PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems.Most products are made in Europe and are made from high quality materials suited to industrial environments.

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . Threaded PVC Socket Glue X Female Thread 10 Bar Rated 75mm x 2 1/2"" Female Thread VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 40mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. PVC-U is lightweight and is extremely easy to install which can save both time and money on any given project when compared to other, more traditional pipework materials.

d : Any water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws. We cannot be held responsible for any injuries or damage that may arise from advice or installation of electrical components in your spa unit. PVC Tee with branch at 45 degrees 16 Bar Rated 75mm x 75mm x 75mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings.