Fujifilm claim 12 line pairs per mm of film resolution for Instax Mini and my 600dpi scans proved capable of wringing as much detail out as possible (300dpi would have been sufficient, maybe even less). Using the Instax Share SP-2 printer gets around problems such as poor camera metering, bad focus, poor optics and lighting colour temperature. However it may introduce new problems: primarily resolution limitations. If you want to do it all in camera, at least you now have that option. Just bear in mind (or pretend not to notice) the less than truly panchromatic colour sensitivity, slightly borked green greys, blown highlights and murky shadows, both of which are mercifully not as bad as Instax Color. The test prints were printed directly. Any pre-processing was done in the printer app and stated as a variant.

Fujifilm Instax Color is much like that, but with less dynamic range, latitude, subtlety and overall charm. Blues in particular come out very dark. I almost thought it was a printer profile issue until I realised the printer was working right, but didn’t account for the film’s rendition; shots taken digitally and printed come out more or less as if they had been shot directly on Instax Mini Color. If you are presenting online (or enlarged), and intend a monochrome output then yes, I would recommend using Instax Mini Monochrome due to what I saw as better dynamic range and detail rendition. However, be aware there are some colours that don’t translate correctly into monochrome, so in certain circumstances, you may be better off using Instax Color and desaturating in post-production. But what if you've got an honest-to-goodness Polaroid camera? The company has been reborn in the 21st century—it's gone through some name changes over the years, from the Impossible Project to Polaroid Originals, but today it's just called Polaroid. The more things change, the more they stay the same. Looking for an instant camera? You're not alone. Instant film is as popular today as it's ever been. Fujifilm and Polaroid are still around making Instax and I-Type films, respectively, along with the cameras to match. If you've got an itch to shoot film again and don't want to have to find a local lab to develop your shots, instant film is a good alternative. It delivers results that almost match digital in their immediacy.I’m going to call this an informal assessment, because it’s neither properly a product review, nor a test report. However, it does go into more detail than anything I’ve found elsewhere on the internet. You could cheat at instant photography competitions, if it wasn’t for a manufacturing defect on the printer which gives purple light leaks on the long sides of the print, but hey ho, it’s the only printer you can buy. Year after year, instant film cameras remain popular gifts to give and receive for their old-school, tangible imagery. There’s genuinely nothing like a photograph shot on an instant film camera. From light leaks to blown out exposures to the notion that the one shot you get is the only shot you get, instant film cameras have been an exciting way to capture current moments since our parents’ generation that simply doesn’t exist with the modernized DSLR or smartphone camera.

Let’s face it, a 62x46mm print isn’t going to make anybody “ooh” and “ah” over the detail. That said, scans of the images made better use of the limited resolution. Greens, yellows, oranges and reds come out ever so slightly green. Blues and to a lesser extent magenta, have an ever so subtle purple hue. It’s not so strong that you’d say it’s not monochromatic, but it’s enough that EMULSIVE wrote that it goes green in the shadows and when an orange filter was used, the whole image came out green. Loki Poster – I’ve had trouble printing this tip my satisfaction in the past. Scene shoes a high dynamic range and lots of shadow detail. Left to right: Original, Color, Monochrome (using a colour image), Monochrome (using a desaturated image)The goal isn’t to make true to life colours, or Kodachrome primaries, but to make flattering portraits and landscapes. Skin tones are lightened and yellows shift slightly to ruddier tones. Overall colours are muted, but reds and particularly greens remain vibrant. Blues are considerably darkened improving sky contrast.

For artists, I really hope that Fujifilm releases a wide version of this film (and a better Fuji Instax Wide camera to go with it), as the size is still a major limiting factor to an otherwise fantastic film format. It’s simply too small to shoot landscapes and non-portrait photography effectively. Low Key – high contrast low key image and I know where all the detail is and how far the light patches go into the shadows. The Lomo'Instant Square is one of the quirkier instant cameras on sale today, but sometimes quirky is good. This instant folder uses a glass lens and works with Fuji Instax Square film to produce sharp, attractive prints. Support for multiple exposures comes in handy for artsy shots, and the included wireless remote gives you more freedom to set up selfies and group photos. Who It's For Every emulsion reacts to colours differently. In a colour film, this results in a particular colour signature or palette, which is tuned by the manufacturer for its target market. I shot Reala 100 and other Fujifilm films for years and they are tailored for the Asian market. Even in low light scenarios, due to its high-speed rating, Instax Mini Film will produce amazingly sharp images. Another user benefit is that it has been improved to lessen the developing time before you see your print - a real benefit when you are photographing young children who are notorious for wanting everything "yesterday". Instax Mini Film has also been enhanced to maintain its stability over the years making it a good choice for archival storage. Those pictures you shot when your kid was 4 - or during that trip to Disneyland will still be around long after he's out of high school. Fuji has also extended the working temperature range of this film to include 40 - 104F so you need not worry about using it year-round.However, while the image quality is great, the actual size of the image is a major limiting factor. The image is small enough that it can be difficult to make out details, and if the image is blown up too much when scanning, it can turn fuzzy despite the image itself being relatively sharp. You can go smaller, too. The tiny Polaroid Go uses similarly tiny film, available in color only. It's cute, but we think it's worth it to use classic Polaroid or Fujifilm Instax Square film because of their bigger image size. Resulting from improved emulsion, development accelerators and development control technology it will keep your images colour-true for years Whoever decided to cancel production at Polaroid should be banging their head on a table, because while they assumed the future was exclusively digital, Fuji steadfastly supported their instant film format through the 2000s and into the 2010s. As digital took over the consumer space, something funny happened. People grew nostalgic for the instant photography of old, and when they found Polaroid had essentially disappeared, they turned to the next best thing, something they probably had never used before even though it had been around all along: Fuji Instax film.

Would scanning the monochrome film in BW benefit in the different color casts? maybe to neutralize it a bit? This is something i will be trying to see if the scans are more pleasing.. We don’t scan bw film in color mode 🙂The Fuji Instax Mini Evo is a digital-instant hybrid camera with a chic retro style and a plastic-fantastic build. The digital design means that the camera works in dimmer light and focuses closer than analog models that take the same Instax Mini film, while on-demand printing ensures that you don't waste film on missed photo ops. Who It's For High Key – the original has tone and detail everywhere, but is very close to blowing out. All colour shades are light ascend natural to the eye and errors are very apparent. Does this all sound right to you? Have you had different experiences with Fujifilm Instax cameras, printers and the Instax Mini Color and Monochrome films? I chose a number of images that I knew would be challenging to print and would cover the full spectrum of what you might shoot. I printed each image in the SP-2 printer and resolution test images (below), were done at exactly the printer resolution to avoid detail loss through resampling. Finally, there is also a custom filter which allows you to play with brightness, contrast and saturation, but not sharpness and the saturation follows Fujifilm’s distorted perception of which colours are dark.